How To Builder Gel

1. After nail prep, apply theBuilder Gel and cure under a UV lamp for 2 mins or LED lamp for 60 secs. Top tip: apply a base coat first if using a coloured Builder Gel.

2. Pop on your Mylee gel polish shade of choice or apply more Builder Gel in thin layers to build up strength, curing for 60 secs each time.

3. Apply another layer of Builder Gel to top it off or use a separate Top Coat and you guessed it, cure.

4. Remove any sticky residue withMylee’s Prep and Wipeon a Lint Free Wipe and voila, stronger nails!

1. Following nail prep, apply an optional base coat and cure under a UV lamp for 2 mins orLED lampfor 30 secs.

2. Attach a Paper Nail Form and brush the Builder Gel over the entire nail, extending the tip to build your desired length and cure for 60 secs. 

3. Build up strength by applying thin layers ofBuilder Geland curing for 60 secs each time, or floating over one thicker layer (be careful for heat spikes from the lamp with this method).

4. Ditch the nail form and file that tip into shape.

5. Apply your favourite Mylee gel polish colour andtop coatas per.

1. Prep the nail and apply your favourite Mylee gel polish colour.2. Pop a dab of Builder Gel where you want to position the jewel or decal and place it on top, curing for 2 minutes (UV) or 60 seconds (LED).

3. Float another layer of Builder Gelover the decal and full nail to encapsulate, then cure.

4. Wipe off any tacky layer with ourPrep and Wipe, then go forth and sparkle!